MYRIAD
ARS-1616

ARS-1616

E-Vocal MYRIAD are multiple channel analog input and analog output Dante converters. There are two models that make up the E-Vocal MYRIAD product, ARS-1616 and ARS-3232. These models are 1U rack mount analogue converters designed to transfer 16 or 32 analogue audio channels over a Dante network in both directions. Space-saving 25-pin D-sub connectors are provided for use with optional breakout boxes to input and output balanced line-level analogue audio signals. Two etherCON connectors (Dante Primary/Secondary) are available for redundant operation using two separate networks. For high availability operation requirements, dual AC input and dual PoE power sources are available for redundant operation. The units feature indicators for operation status and current sample rate as well as overload LEDs for each input and signal LEDs for each input and output. Any other settings, such as sampling frequency, channel routing or latency, can be made by the free “Dante Controller” computer application. The sampling frequency, power source status, will be displayed on the 2×20 character display located on front bezel.

ARS-1616

  • Convert 16 channels of analog line input signals to a Dante ® network
  • Converts a Dante ® stream into 16 channels of analog output signals.
  • Two LAN etherCON connectors for primary and secondary networks provide redundancy
  • Up to 96 kHz sampling rate and 24 bit resolution
  • 2x20 characters display to display operation status and current sample rate
  • 25-pin D-sub connectors for balanced line inputs/outputs (AES59-2012 pin assignment)
  • D-Sub to XLR patch panel can be used for live music or studio applications
  • Built-in web-based controller for monitoring unit operation status via web browser.
Model Name ARS-1616
ARS-3232
PRODUCT SPECIFICATIONS
Function 16Ch Analog Input
16Ch Analog Output
32Ch Analog Input
32Ch Analog Output
Max Signal Level (Balanced) +24dBu / +4dBu / 0dBu, 0dBV /-10dBV
+18dBu / +4dBu / 0dBu, 0dBV /-10dBV
Frequency Response 20Hz to 20kHz (-/+0.5dB)
Impedance 20k Ohm balanced, 10k Ohm unbalanced
150 Ohm balanced, 75 Ohm unbalanced
Dynamic Range ﹥ 100dB
Signal to Noise Range ﹥ 100dB
Total Harmonic Distortion ﹤ 0.01% at +4dBu
Mic PreAmp NA
Lip-Sync Delay NA
AC Power Dual 110-220VAC
PoE Dual Class 1 802.3af PoE
Sample Rates 44.1, 48, 96 kHz
Bit Depths 24
Dante Device Latency 1, 2, or 5ms (configurable using Dante Controller
Network Transport Dante Audio over IP, AES67 RTP (Dual RJ45 or Singlemode SFP/Multimode SFP)
Document Datasheet/Brochure 2D Line Drawing User Manual
PDF N/A N/A