-
The RS-121 is a 19" 1RU rack mount chassis for a single ARD-1006 transmitter, receiver, AMP-1006 video splitter module or MicroBox computer module. The nine swappable modules provide numerous configurations and functionalities to meet ever changing requirements of ProAV events. The nine swappable modules include HDBaseT 2.0 transmitter, receiver, AV over IP transmitter and receiver with Copper or Fiber interface, computer module and video splitter modules. The RS-121 can also be wall mounted using a wall mount bracket.
This provides a significant maintenance advantage and configuration flexibility. In case of a failure, the transmitter, receiver, splitter or computer module can easily be swapped out in seconds. -
- Standard 1RU height, 7" in depth
- 19" rack mount or wall mount mounting option
- Swappable modular design providing maximum flexibility of configuration to fit highly dynamic event requirements
- Swappable modular design to obtain minimum maintenance and upgrade efforts requirement
- Can be configured in Transmitter, Receiver or Computer module in seconds
- Common rear output connectors for all modules: HDMI, RS-232, USB 2.0
- HDBaseT extender supports 4K ultra high resolution video, RS-232, USB, IR signals transmission and receiving
- HDBaseT transmitter supports PoE to power the receiver unit at remote location
-
RS-121-A07-TX
Model Name RS-121-A07 PRODUCT SPECIFICATIONS Technical RS-121-A07-RX Role of Usage Transmitter (TX) Receiver (RX) Video Bandwidth 350MHz Video resolution Up to 3840 x 2160 Transmission Cat5e/Cat6 cable Extension signal Video, Audio, remote control, touch control, keyboard/mouse, Ethernet, Power RS-232 Signal Type Full-duplex & baud rate Input video signal 1.2 Volts [peak-to-peak] Loop-Back 1 x HDMI Loop-Back at TX ESD Protection [1] Human body model — ±15kV [air-gap discharge] and ±8kV [contact discharge]
[2] Core chipset — ±8kVPCB Stack-up 6-layer board [impedance control — differential 100Ω; single 50Ω] I/O Communication Input 1 x HDMI 2.0, 1 x USB
1 x RS-232, 1 x IR, 1 x 48V DC1 x Remote IN (PSE) Output 1 x Local out (PSE), 1 x HDMI 2.0 1 x HDMI 2.0, 1 x RS-232
4 x USB, 1 x IREthernet Hub 2 x LAN 2 x LAN HDMI connector HDMI female RS-232 connector DB-9 Keyboard and mouse connector USB Type A USB connector USB Type A (RS-121-A07-RX), USB Type B (RS-121-A07-TX) Physical Information Mounting Rack Mount(Optional Wall Mount Bracket) Physical Dimension
(W x H x D)18.87(10.44)x 1.73 x 6.96 inch
479.3(265.3) x 44.0 x 176.7 mm Rack Mount(Wall Mount)Power/Thermal Specs Power supply 12V DC Power input Environmental Operation Temperature 0~50°C (32~122°F)) Storage Temperature -20~60°C (-4~140°F) Relative Humidity 0~95% -
Ordering Information RS-121-A07-TX RS-121-A07-RX Type Rack Mount HDBaseT Extender Transmitter Rack Mount HDBaseT Extender Receiver -
Packing List
FSP060-DBAE
QTY：160W AC Power Adapter (AC Power Adapter Version Only) 
FSP060-DBAE
6 Feet US Power Cord (AC Power Adapter Version Only) QTY：1
-
Description
The RS-121 is a 19" 1RU rack mount chassis for a single ARD-1006 transmitter, receiver, AMP-1006 video splitter module or MicroBox computer module. The nine swappable modules provide numerous configurations and functionalities to meet ever changing requirements of ProAV events. The nine swappable modules include HDBaseT 2.0 transmitter, receiver, AV over IP transmitter and receiver with Copper or Fiber interface, computer module and video splitter modules. The RS-121 can also be wall mounted using a wall mount bracket.
This provides a significant maintenance advantage and configuration flexibility. In case of a failure, the transmitter, receiver, splitter or computer module can easily be swapped out in seconds. -
Features
- Standard 1RU height, 7" in depth
- 19" rack mount or wall mount mounting option
- Swappable modular design providing maximum flexibility of configuration to fit highly dynamic event requirements
- Swappable modular design to obtain minimum maintenance and upgrade efforts requirement
- Can be configured in Transmitter, Receiver or Computer module in seconds
- Common rear output connectors for all modules: HDMI, RS-232, USB 2.0
- HDBaseT extender supports 4K ultra high resolution video, RS-232, USB, IR signals transmission and receiving
- HDBaseT transmitter supports PoE to power the receiver unit at remote location
-
Spec.RS-121-A07-TX
Model Name RS-121-A07 PRODUCT SPECIFICATIONS Technical RS-121-A07-RX Role of Usage Transmitter (TX) Receiver (RX) Video Bandwidth 350MHz Video resolution Up to 3840 x 2160 Transmission Cat5e/Cat6 cable Extension signal Video, Audio, remote control, touch control, keyboard/mouse, Ethernet, Power RS-232 Signal Type Full-duplex & baud rate Input video signal 1.2 Volts [peak-to-peak] Loop-Back 1 x HDMI Loop-Back at TX ESD Protection [1] Human body model — ±15kV [air-gap discharge] and ±8kV [contact discharge]
[2] Core chipset — ±8kVPCB Stack-up 6-layer board [impedance control — differential 100Ω; single 50Ω] I/O Communication Input 1 x HDMI 2.0, 1 x USB
1 x RS-232, 1 x IR, 1 x 48V DC1 x Remote IN (PSE) Output 1 x Local out (PSE), 1 x HDMI 2.0 1 x HDMI 2.0, 1 x RS-232
4 x USB, 1 x IREthernet Hub 2 x LAN 2 x LAN HDMI connector HDMI female RS-232 connector DB-9 Keyboard and mouse connector USB Type A USB connector USB Type A (RS-121-A07-RX), USB Type B (RS-121-A07-TX) Physical Information Mounting Rack Mount(Optional Wall Mount Bracket) Physical Dimension
(W x H x D)18.87(10.44)x 1.73 x 6.96 inch
479.3(265.3) x 44.0 x 176.7 mm Rack Mount(Wall Mount)Power/Thermal Specs Power supply 12V DC Power input Environmental Operation Temperature 0~50°C (32~122°F)) Storage Temperature -20~60°C (-4~140°F) Relative Humidity 0~95% -
Ordering Info.
Ordering Information RS-121-A07-TX RS-121-A07-RX Type Rack Mount HDBaseT Extender Transmitter Rack Mount HDBaseT Extender Receiver -
Accessories
Packing List
FSP060-DBAE
QTY：160W AC Power Adapter (AC Power Adapter Version Only)
FSP060-DBAE
6 Feet US Power Cord (AC Power Adapter Version Only) QTY：1
